こちらで紹介したDisplay Driver Uninstaller (DDU)の使い方。 2020/01/02 少し前のバージョンから初回起動メッセージが追加されてます。 内容はこんな感じ: DDUを起動するのは初めてのようです。 DDUを使用する前に次のことを確認してください: 1- 問題と構成によっては、事態を改善させも悪化させもする可能性があります。 2- バックアップが必要です。 3- ライセンス、ReadmeおよびTosに必ず目を通してください。 4- いかなる種類のデータの損害または損失についても責任を負いません。 5- 問題がある場合は、いつでも喜んでお手伝いします。 これ、言語ファイルでは翻訳できないので、Wagnard氏に何とかならないか確認中。。。 それから一応最新版の言語ファイルはこちらです。 zipファイルをDLして解凍後、\settings\Languages
Prolific PL-2303 Code 10 Fix Copyright 2018, Family Software. All rights reserved. Prolific USB To Serial Driver "Code 10" Fix! New Version 1.82, 04/09/18 Windows 32 and 64-bit Operating Systems - Prolific PL-2303 Driver Fix (VID_067B&PID_2303) For Windows XP, Windows 7, Windows 8, Windows 8.1 and Windows 10! "This Device cannot start (Code 10)" "No driver installed for this device" "Device driver
This article provides steps for determining the driver and firmware versions for Host Bus Adapters (HBA) and physical network interface cards (NICs) on ESXi. The VMware Hardware Compatibility List is the collection point for these Information as provided by the vendor, so that the customer does not have to contact the Vendors for each component. VMware does not develop or test Drivers. For more in
NIC drivers net-e1000e: Obsolete - Driver for Intel I217/I218/82579LM/82574L net-tulip: DECchip 21140 Ethernet driver (This driver allows running ESXi as a VM under Microsoft Hyper-V) net55-r8168: Updated driver for Realtek 8168/8111/8411/8118 based NICs net51-r8169: Adds the blacklisted ESXi 5.1 built-in net-r8169 driver back to ESXi 6.0 net51-sky2: Adds the blacklisted ESXi 5.1 built-in net-sky2
Taking server virtualization down from the clouds to real life experience ... In my previous post I warned that VMware has removed some drivers for officially unsupported NICs (Realtek and Marvell) from ESXi 5.5 (compared to ESXi 5.1 and 5.0 that still included them). These drivers still work with ESXi 5.5, and if you upgrade an ESXi 5.1 host to 5.5 then you can just keep and continue using them.
Synaptics provides this support portal to try and answer common questions you might have about DisplayLink technology. However we cannot provide product specific support. Synaptics is a chip and technology company and we do not sell any product directly to end users, therefore we only have a small end user support team. Members of the Synaptics team are active on the DisplayLink Forum, where your
状況 Fujitsu PRIMERGY TX100 S3にNICは二つ搭載されているが、このうち82579LM はESXi5.1で認識しないので、ドライバをアップデートする必要がある。 FujitsuのOEM版ISOでもNICは認識されないが、非公式のドライバならばある。 今回はあくまで自鯖なので、気にせず使っていく方針です。 ESXiのドライバアップデートということ自体したことがなかったのでメモを残しておく。 対処 参考サイト: ESXi5.1のドライバを作成してみる(intel 82579LM/82574L編) VMware ESXi5.1検証 第9回 ESXiへのパッチ適用について 1つ目のサイトで提供してくださっているドライバ(net-e1000e-2.1.4.x86_64.vib)を使わせていただく。 どうも、ESXiにパッチをあてたりするときはvibファイルという形
富士通 PRIMERGY TX100 S3 に搭載されている 82579LM は ESXi5.1で 認識しないので、intelからダウンロードしたe1000eドライバ(2.1.4)を ビルドしてみました。 動作テストはESXi5.1のみですが、5.0でも同様に使えると思います。 テスト環境はESXi5.1.0, 799733 + VM(Win8プレビュー版) 富士通 PRIMERGY TX100 S3 + Xeon E3-1240 + メモリ8GBに以下のNIC4枚差しです。 NetXen NX3-20GCu (Qlogic QLE-3142/Dual 10GbE) x3 Intel ET DualPort Server (82576) ↓ドライバ適用するとこんな感じです。 ↓ちゃんと動くならメモリ増設してNEC Express5800/110Ge(Socket775)をリプレ
intelからダウンロードしたe1000eドライバ(2.3.2)をビルドしてみました。 もの自体は、とある筋より要望があって4月中旬ごろに作ったものですが、 Z87X-UD5Hでも動作確認が取れたので一般公開します。 このドライバは net-e1000e-2.1.4.x86_64.vib の完全置き換え用なので、 そちらで動くマシンにはすべて導入できます。 ESXi5.1のドライバを作成してみる(intel 82579LM/82574L編) テスト環境はESXi5.1.0, 1065491 + VM(Win7)です。 GIGABYTE Z87X-UD5H + Core i7-4770 + メモリ16GB に以下のNIC計3枚挿しです。 Qlogic QLE-8152 (10GbE/FCoE SFP+ x2) Intel ET DualPort Server (82576) I
リリース、障害情報などのサービスのお知らせ
最新の人気エントリーの配信
処理を実行中です
j次のブックマーク
k前のブックマーク
lあとで読む
eコメント一覧を開く
oページを開く