Windows 7以降では「以前のバージョン」と呼ばれる機能があり、NTFSのスナップショットにエクスプローラからアクセスし、特定のファイルの以前のバージョンを復元させたり、あるいはファイルシステムの過去の状態をブラウズすることができる。 この機能はSMBによる共有フォルダ上でも利用できる。これまで僕は当該機能はsambaではサポートされておらず、使いたい場合はフォルダを共有する側のOSとしてWindowsを利用しなければならないと思いこんでいたが、どうやらsambaでもshadow_copy2 VFSモジュールを使うことで利用できるらしく、さらにZFSが提供するスナップショットをそのまま利用できることが分かったので設定した。なお、ZFSはZFS on Linuxで利用している。 環境 Debian Wheezy 7.8 ZFS on Linux 0.6.3 Samba 4.1.11 なお
The previous post introduced readers to the concept of VDEVs with ZFS. This post continues the topic discusing the RAIDZ VDEVs in great detail. Standards Parity RAID To understand RAIDZ, you first need to understand parity-based RAID levels, such as RAID-5 and RAID-6. Let's discuss the standard RAID-5 layout. You need a minimum of 3 disks for a proper RAID-5 array. On two disks, the data is stripe
Linus Torvalds Doesn't Recommend Using ZFS On Linux Written by Michael Larabel in Linux Storage on 9 January 2020 at 04:49 PM EST. 255 Comments Linux kernel creator Linus Torvalds doesn't recommend using ZFS On Linux at least until Oracle were to re-license the code to make it friendly for mainline inclusion. But even then he doesn't seem turned on by the ZFS features or general performance. Derai
ZFS High-Availability NAS The ZFS filesystem has been a game-changer in the way we approach local application data storage, shared storage solutions, replication and general data backup. I've been a long-time proponent of ZFS storage in a variety of scenarios, going back to my first experiences with OpenSolaris in 2008, buying my own ZFS Thumper/Thor in 2009, adopting ZFS on Linux for production u
概要 CentOS7のデフォルトのファイルシステムがXFSとなりました。 mkfsコマンドでも、minix, xfs, btrfsが使えるようになりました。 そこで気になるファイルシステムを色々調べ、ベンチマークを自分なり取ってみました。 多少なりともご参考になればと思います。 色々なファイルシステム こちらをご参考ください。 http://qiita.com/sion_cojp/items/c8e015db39ddbf43012e それぞれファイルシステムを作ってみる 今回の環境は CentOS6(ホスト) 4Core, MEM:32G, HDD:300G CentOS7(ゲスト。こちらで計測しております。) vCPU *1, MEM:4G, HDD:40G 容量が少なかったため、btrfsのベンチマークが終わった後、zfsにファイルシステムを変更し検証をしております。 ### zfsの
vector.hateblo.jp 友人が上の記事で録画サーバについて色々書いていたので、自分も自鯖の現状を把握するために書き出してみる。 上記記事と似たようなアジェンダで行く。 前提 あ、私的利用の範囲ですよ。 ほぼ毎日放送されているアニメを録画している また以下のタレントが出演している番組もほぼ録画されている マツコ・デラックス さまぁ~ず TSの増加ペースとしては、1本3〜6GBで1週間で60〜80本ほど(溜まるときは300GB/weekぐらいのペース) 流石に容量増加に耐え切れないので、録画が完了したTSから順次ffmpegにてh.264+aacな720pのmp4に変換される エンコード済のTSは1ヶ月ほど保持してから削除 サーバについて 自鯖その1(NAS) HP ProLiant Microserver N40L AMD Turion II NEO 1.5GHz 2Core U
CLI Usability These are improvements to the command line interface. While the end result is a generally more friendly user interface, getting the desired behavior often required modifications to the core of ZFS. Listed in chronological order (oldest first). Pool Comment OpenZFS has a per-pool comment property which can be set with the zpool set command and can be read even if the pool is not impor
ZFSでzpoolを作成するとき、各デバイスまたはファイルに3種類の役割がある。 データ用、キャッシュ用、ログ用とあるが、zpool構成するときにそれぞれどのように使えるかまとめてみた。 検証に使ったのは取ったのはOpenSolarisのb131、zpoolバージョンは22だ。 デバイスの用途と構成・特徴一覧 ざっとこうなる。 zpool形式datacachelogスパン○○○ミラー○×○RAIDZ ○××RAIDZ2○××RAIDZ3○××detach条件付○○条件付○※ファイルを指定○×○ dataとlogは似ている data用は取れる構成コンプリートなのは当たり前だが、detachには制限がある。 logも同様だが、完全なデータのコピーがないデバイスは取り外せない、すなわちミラー状態の片割れが唯一取り外しOKで他の構成ではそもそも取り外しができない。 もちろんreplaceは可能、順
(2013/12/10追記: まるでZFSが不安定かのようにとられている方もいくらかいらっしゃるようですが、記事の中で書いたとおり、ZFSプールが完全にインポートできなくなった経験は2009年以来RAID-Zを使っていて一度もありません。むしろカーネルが何度も停止していてもソフトウェアベースのコントロール複数のディスクで構築しているパリティ付きのボリュームが問題なく使えているのはやはり優秀だと思います。dedupはちょっとアレですね...) ZFSの中でも一度オンにしてしまうと生涯呪われてしまい成仏できなくなる機能、それが重複排除(Deduplication)です。 ZFSで dedup=on と設定した状態では、書き込み時に重複排除に使用する DDT という情報をメモリ上およびメディア上に保持するようになります。普通に読み書きしている範囲ではそれほど困らなかったりもするのですが、曲者なの
UPDATE (May 06, 2012): I apologize for mentioning it supports encryption. Pool version 28 is the latest source that the Free Software community has. Encryption was not added until pool version 30. So, encryption is not supported natively with the ZFS on Linux project. However, you can use LUKS containers underneath, or you can use Ecryptfs for the entire filesystem, which would still give you all
Hi Folks, I've been working on those for a while, i hope you'll enjoy them and use it It's all described here but in french http://www.hypervisor.fr/?p=4010 Zpool Usage graph template: http://files.hypervisor.fr/scripts/cact ... _usage.xml snmp query: http://files.hypervisor.fr/scripts/zpool_usage.xml snmp config: Code: Select all extend .1.3.6.1.4.1.2021.88 zpool_name /bin/bash -c "zpool list -H
日本最強の看板を下ろしたミラーサーバftp.jaist.ac.jpの管理者の一人が、 このサーバにまつわるよしなしごとを語ります。 English versions of some posts on another blog. 現在ftp.jaist.ac.jpはストレージの性能不足に悩まされています。ピーク時にストレージのI/Oが飽和して、スループットがやや低くなることがあります。ストレージは11本のHDDで組んだRAID-Z2を2組たばねて構成しています。読み込みのIOPSは、HDDが22本あるのに約600しか出ません。HDDのIOPSは約180出ているので、全体のIOPSはHDDの約3.6本分になります。 これはあくまでもキャッシュなしの性能です。読み込みのI/Oの98%はARCかL2ARCのいずれかにヒットするので、キャッシュ込みのIOPSは約30,000となります。最近はこれでも
リリース、障害情報などのサービスのお知らせ
最新の人気エントリーの配信
処理を実行中です
j次のブックマーク
k前のブックマーク
lあとで読む
eコメント一覧を開く
oページを開く