On Ubuntu 15.10, when I want to format using the NTFS file system an external 4TO disk connected by USB3 (on a StarTech USB/eSATA hard disk dock), I have a lot of I/O errors, and the format fails. I tried GParted v 0.19, and GParted on the latest live CD gparted-live-0.23.0-1-i586.iso, with the same problem. After that, and using GParted on Ubuntu 15.10 and the same USB3 connection, I tried to for
Planex BT-Micro3H2Xは、Bluetooth3.0+HSおよび、Wifi 802.11b/g/nに対応したコンポタイプのアダプタです。Openblocks AX3およびA6での動作検証を行いました。 OBDN技術ブログによる動作検証は、該当するデバイスの動作を保証およびサポートを行うものではありません。 内容に関するご指摘などありましたら、ブログ記事の担当までご連絡下さい。 <検証環境> OpenBlocks AX3/4 Debian 6.0 kernel: 3.0.6 OpenBlocks A6 Debian 6.0 kernel: 2.6.31.8 1. 対応ドライバと事前準備 本デバイスは、BluetoothにCSR8510、WifiにRealtek8192CUを使用しています。2つのデバイスは、1つの複合デバイスとしてではなく、内部にHubを介して接続されていますの
by Daniel Drake (dsd) Version 0.74 The most recent version of this document can always be found at: http://www.reactivated.net/writing_udev_rules.html Contents Introduction About this document History The concepts Terminology: devfs, sysfs, nodes, etc. Why? Built-in persistent naming schemes Rule writing Rule files and semantics Rule syntax Basic rules Matching sysfs attributes Device hierarchy St
お世話になります. 山内と申します. 今回,ArmadillioでのUSBシリアルデバイスの認識について質問させて頂きます. 現在,USBシリアルデバイスの刺した順番に影響されずに,利用するために, ATDE5では,"/dev/serial/by-path/"に登録されたUSBの刺した位置から, デバイスのポートを開いております. 同様のことを,Armadillo-840上で試そうとしたところ, USBシリアルデバイスを刺しても"/dev/serial"以下が作成されないため,困っております. Armadillo-840上で,USBシリアルデバイス挿入時に,"/dev/serial"以下に認識させるためには, どのようにすればよろしいのでしょうか. ご存知の方がいれば,教えていただければと思います. よろしくお願いいたします. 中村です。 > Armadillo-840上で,USBシリアル
I've updated my HTPC from kernel 3.7.10 to 3.10.7 and it seems CONFIG_USB_SUSPEND is now gone from the kernel options and included in PM. The main problem I'm facing is that I have an external HDD and when suspending and waking up the HTPC, it isn't available to the system. The HDD wakes up (you can hear it spin up again), but when you try to access the mount point you get the following error: ZOT
This guide describes the Linux's ability to power off USB devices and to let USB devices request to wake them up again. It is important to note many optical mice do not support power saving. Once they lose power they cannot detect motion and cannot power back on when motion is invoked. With this being stated, it is possible to use specific driver calls or the sysfs /sys/bus/usb/devices/usb[1-]/pow
BeagleBoardUbuntuから、ビルド済みのイメージ入れてみたけど、USB Hotplugが効かねぇ... 少し中を調べてみたけど、kernelにイベントがまったく上がってこない。 デバイスとしては認識している。 どうやら、3.8系のkernelではUSB Hotplugは動いていないようだ。 パッチはこれ。 https://github.com/beagleboard/kernel/commit/35a3abaaa7a44cdec3e4c63407b48d7cdc2a8533 取り込まれた感じはしないな。 angstrom build (05.27) には取り込まれているようだ。 https://groups.google.com/forum/#!topic/beagleboard/uWMNdBv_aPg
リリース、障害情報などのサービスのお知らせ
最新の人気エントリーの配信
処理を実行中です
j次のブックマーク
k前のブックマーク
lあとで読む
eコメント一覧を開く
oページを開く